Clearcase and hudson - Unix master and windows slave

I work for a very large company which blindly follows UCM. Clercase is managed by UCM team.Everything happens by rule book. Clearcase clients on unix environment is rarity and we had lot of problems getting clearcase client installed on a unix box. But finally we got there. I use the unix as my master. My master has a few projects and the ucm stream is defined for the UCM plugin view creation parameters as follows.

some_dev_shared_stream@/astream

load rules as following

vobs/myvob/component/

view gets created and works fine on unix, managed to setup a slave this morning and the slave is a windows box.

On build on the slave I get a UCM plugin error could not attach the view to the stream.

I took the make view command out, and changed the "/" in some_dev_shared_stream@/astream to "\" and ran the command from windows cmd mode and view was created.

My development workstation on windows box - the views do not have vobs in front of them, so I am kind of sure that also is going to be a problem.

has anybody come across the above?

View the original article here

Re: Timed out trying to start vob_server for vob in Windows Server 2008

Replies: 1 - Pages: 1 - Last Post: Nov 10, 2010 12:55 AM Last Post By: Dilip.J.Mansukh... Threads: [ Previous | Next ]
Posts: 2
Registered: Mar 14, 2008 02:52:23 PM Timed out trying to start vob_server for vob in Windows Server 2008
Posted: Nov 09, 2010 09:34:11 PM ClearCase shows an error message (shown below) while trying to run cleartool 'describe' command from the client

cleartool: Error: Timed out trying to start vob_server for vob ccadmin01:D:\Clea
rCase_Storage\VOBs\Sistemas\web\w_totalplay_vob.vbs
cleartool: Error: See albd or vob error logs on host ccadmin01

When I execute the command from the client, the vob_server appears started up on windows task manager on the server but after a couple of minutes shows the error message on the client. I've turned off windows firewall, checked up ports, changed vob_server.exe, vobrpc_server, albd_server properties to run as an administrator but it didn't work. The server Operative System is Windows Server 2008 R2 and ClearCase 7.1.2.

Can anybody help me please?

Thanks

Posts: 111
Registered: Jul 23, 2006 01:27:50 PM Re: Timed out trying to start vob_server for vob in Windows Server 2008
Posted: Nov 10, 2010 12:55:26 AM   in response to: BancoAzteca's post Hi,

Please run this utility which will help to give more details why the abld is behaving like this
once run share the find

http://www-01.ibm.com/support/docview.wss?rs=0&uid=swg21131335

Thanks
Dilip

Use the search field to find all types of content in My developerWorks with that tag.

Use the slider bar to see more or fewer tags.

Popular tags shows the top tags for this particular type of content or application that you're viewing.

My tags shows your tags for this particular type of content or application that you're viewing.

Use the search field to find all types of content in My developerWorks with that tag. Use the slider bar to see more or fewer tags. Popular tags shows the top tags for this particular type of content or application that you're viewing. My tags shows your tags for this particular type of content or application that you're viewing.MoreLess 

View the original article here

Timed out trying to start vob_server for vob in Windows Server 2008

Replies: 1 - Pages: 1 - Last Post: Nov 10, 2010 12:55 AM Last Post By: Dilip.J.Mansukh... Threads: [ Previous | Next ]
Posts: 2
Registered: Mar 14, 2008 02:52:23 PM Timed out trying to start vob_server for vob in Windows Server 2008
Posted: Nov 09, 2010 09:34:11 PM ClearCase shows an error message (shown below) while trying to run cleartool 'describe' command from the client

cleartool: Error: Timed out trying to start vob_server for vob ccadmin01:D:\Clea
rCase_Storage\VOBs\Sistemas\web\w_totalplay_vob.vbs
cleartool: Error: See albd or vob error logs on host ccadmin01

When I execute the command from the client, the vob_server appears started up on windows task manager on the server but after a couple of minutes shows the error message on the client. I've turned off windows firewall, checked up ports, changed vob_server.exe, vobrpc_server, albd_server properties to run as an administrator but it didn't work. The server Operative System is Windows Server 2008 R2 and ClearCase 7.1.2.

Can anybody help me please?

Thanks

Posts: 111
Registered: Jul 23, 2006 01:27:50 PM Re: Timed out trying to start vob_server for vob in Windows Server 2008
Posted: Nov 10, 2010 12:55:26 AM   in response to: BancoAzteca's post Hi,

Please run this utility which will help to give more details why the abld is behaving like this
once run share the find

http://www-01.ibm.com/support/docview.wss?rs=0&uid=swg21131335

Thanks
Dilip

Use the search field to find all types of content in My developerWorks with that tag.

Use the slider bar to see more or fewer tags.

Popular tags shows the top tags for this particular type of content or application that you're viewing.

My tags shows your tags for this particular type of content or application that you're viewing.

Use the search field to find all types of content in My developerWorks with that tag. Use the slider bar to see more or fewer tags. Popular tags shows the top tags for this particular type of content or application that you're viewing. My tags shows your tags for this particular type of content or application that you're viewing.MoreLess 

View the original article here

Re: question about windows release area

This question is not answered.
Replies: 1 - Pages: 1 - Last Post: Nov 4, 2010 7:33 PM Last Post By: martina Threads: [ Previous | Next ]
Posts: 202
Registered: May 12, 2007 03:11:48 PM question about windows release area
Posted: Nov 04, 2010 12:30:42 PM Hi,

I would like to add the setting of user env vars CLEARCASE_PRIMARY_GROUP and CLEARCASE_GROUP into different sitedefs.dat files to force CC to set this variables on installation.

Is this possible?
I don't like to write *.bat files and then to use "reg add" or "reg import".

Cheers,
Uwe

--
Dipl. Inform. Uwe Satthoff
( jcp@comasy.de )
currently consultant @ Airbus
( Uwe.Satthoff@airbus.com )

Posts: 877
Registered: Jun 09, 2005 09:06:53 PM Re: question about windows release area
Posted: Nov 04, 2010 07:33:32 PM   in response to: Uwe Satthoff's post is this CC version <= 7.0.x ?
I'd advise against trying to hack something since everything will change with CC 7.1 and up installs.
You can write a bat script that will set the env var and then call the CC install (mimicking that click on sitedefs).

That you will be able to modify in the future to call IM.

hth

Martina
Don't Postpone Joy - Have Fun

ReleaseTEAM Inc
http://www.releaseteam.com
IBM Rational Certified Consultants
IBM Business Partner

Use the search field to find all types of content in My developerWorks with that tag.

Use the slider bar to see more or fewer tags.

Popular tags shows the top tags for this particular type of content or application that you're viewing.

My tags shows your tags for this particular type of content or application that you're viewing.

Use the search field to find all types of content in My developerWorks with that tag. Use the slider bar to see more or fewer tags. Popular tags shows the top tags for this particular type of content or application that you're viewing. My tags shows your tags for this particular type of content or application that you're viewing.MoreLess 

View the original article here

question about windows release area

This question is not answered.

Posts: 202
Registered: May 12, 2007 03:11:48 PM question about windows release area
Posted: Nov 04, 2010 12:30:42 PM Hi,

I would like to add the setting of user env vars CLEARCASE_PRIMARY_GROUP and CLEARCASE_GROUP into different sitedefs.dat files to force CC to set this variables on installation.

Is this possible?
I don't like to write *.bat files and then to use "reg add" or "reg import".

Cheers,
Uwe

--
Dipl. Inform. Uwe Satthoff
( jcp@comasy.de )
currently consultant @ Airbus
( Uwe.Satthoff@airbus.com )

Use the search field to find all types of content in My developerWorks with that tag.

Use the slider bar to see more or fewer tags.

Popular tags shows the top tags for this particular type of content or application that you're viewing.

My tags shows your tags for this particular type of content or application that you're viewing.

Use the search field to find all types of content in My developerWorks with that tag. Use the slider bar to see more or fewer tags. Popular tags shows the top tags for this particular type of content or application that you're viewing. My tags shows your tags for this particular type of content or application that you're viewing.MoreLess 

View the original article here